|
|
Build Your Online Product Catalogs?
| Product Name: |
THY-23A Oil Quality Analyzer
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
204¡Á100¡Á45mm |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
The portable model THY-23A Oil Quality Analyzer is an intelligent product,with high performance of anti-interference ability and low power consumption.The analyzer with high sensitivity, resolution, stability and good repetitiveness.It uses rechargeable Li-Battery, especially suitable for the production on-site work and field environment work.
a£©Quick Test(QT)
¢ñ.Test used oil directly.
(The data of tested oil already saved in oil analyzer)
¢ÙSelect ¡¾QT¡¿function,press ¡¾Enter¡¿button,screen shows¡±Input Oil No:0000¡±, press arrows to input numbers and ¡¾Enter¡¿button into testing status,screen shows¡±Oil No,Upper Limit and Lower Limit of Scrapping Index¡±.
¢ÚScreen shows¡±Clean Oil Chamber,then press¡¾Enter¡¿button¡±clean the oil chamber with petroleum ether,and wipe out chamber with dry cotton ball.Then press¡¾Enter¡¿button again and screen shows¡±please wait,check oil chamber...¡±.
¢ÛAfter self-check of the oil chamber,screen shows¡±Add used oil,then press¡¾Enter¡¿button¡±,drip 3-5 drops of used oil,when the oil get fully contacted in oil cavity,press¡¾Enter¡¿button,the screen shows¡±Please wait,test used oil...¡±.
¢ÜAfter finishing the test,screen shows the test result and Scrap Reference advice,Press¡¾¡ü¡¿button can test used oil continuously;press ¡¾Enter¡¿ button can save the test result and press ¡¾Back¡¿ button back to Function Selection Interface.
¢ò.Add data of the new oil
Add new oil which need tested while the analyzer shows ¡±add used oil¡±,record the testing value,and input the value while operating step¢Ù-¢Ü.
b)Standard Test (ST)
Press arrow key to select ¡¾ST¡¿function,Similar operation with Quick Test except for adding a step of new oil test,after cleaning the oil chamber first time,screen shows¡°add new oil¡±.
c)Water Test(WT)
¢ÙPress arrow key to select ¡¾WT¡¿function,press ¡¾Enter¡¿ button and screen shows¡±Input Oil No:0000¡±,then press¡¾Enter¡¿button again,screen show¡±Oil No.¡±
¡°New Oil Data¡±¡°Clean Oil Chamber,then press¡¾Enter¡¿button¡±
¢ÚClean the oil chamber with pe |
| Company: |
Xi'an Tianhou Electronic-Technology Co.,Ltd
|
| Contact: |
Mr. Lawrence Chang |
| Address: |
Floor 4,TongXin Attic,XieTong Mansion,No.12,GaoXin Second Road,High-tech Zone,Xi'an City |
| Postcode: |
710075 |
| Tel: |
029-88386798 |
| Fax: |
029-85215296 |
| E-mail: |
|
|
|
|
Home
